MAXON CINEBENCH 10 Benchmark

All Wattage and KWH’s of energy results = Lower is Better in all Instances  (Highlighted in Yellow)

In all instances, Benchmark Results Higher Scores = Better/Faster

Autodesk - 3ds Max 9 SP2

All Wattage and KWH’s of energy results = Lower is Better in all Instances  (Highlighted in Yellow)

In all instances, Benchmark Results Lower Times = Better/Faster

AT this point we took a check sum set of figures in directly in comparison from the previous review and our findings at this stage had us all completely by surprise.   Remember that lower is better in this instance from all figures shown below.

Total Time to complete the above tests from the AMD Test Platform covering SPECviewperf 10 ®, HD Tach Version 3.0.4.0, SiSoftware Sandra XII SP1 Professional, MAXON CINEBENCH 10, Autodesk - 3ds Max 9 SP2 throughout was 11 hours and 8 minutes.   Over this period 1.26 KWH’s of energy was used.

Total Time to complete the above tests from the Intel Test Platform covering SPECviewperf 10 ®, HD Tach Version 3.0.4.0, SiSoftware Sandra XII SP1 Professional, MAXON CINEBENCH 10, Autodesk - 3ds Max 9 SP2 throughout was 8 hours and 10 minutes.   Over this period 0.60 KWH’s of energy was used.

The total time and energy saved to complete the task over this period is substantial and the figures shown are quiet astonishing.

Page 1 - Introduction

Page 2 - Hard Disc Format & Software Installation

Page 3 - SPECviewperf 10 ®, Multi Sampling and Multi Threading

Page 4 - HD Tach Version 3.0.4.0 & SiSoftware Sandra XII SP1 Professional

Page 5 - MAXON CINEBENCH 10 Benchmark & Autodesk - 3ds Max 9 SP2

Page 6 - SPECapc for 3ds Max™ 9, SPECapc for SolidWorks 2007™ & Diskeeper® 2008 Pro Premier Edition

Page 7 - Conclusions